|
GarTamer IV
Years of experience, and three prior bowfishing rigs, helped us to put together a primo bowfishing unit.
The first step was to pick a boat that would satisfy our needs and usage. After much deliberation, we settled on the G-3 1860 CCT "Gator Tough" series by Yamaha Boats. Length is 18' 1", Beam - 80", tunnel hull for shallow running, and cener console. Powered by a 90 Yamaha 4-stroke on the back, and a Motor Guide SWDS82 Great White 24 Volt trolling motor on the front.
Navigational electronics are Lowrance LMS - 480m, recording, 200kHz sonar with GPS+WAAS.
The elevated "shooting platform" was designed to configure with the boats hull. A 6' X 6' deck frame was constructed with 1 1/2" stainless steel angle and flat stock. Hand rails are 3/4" s.s. tubing. The platform is elevated 17" from the gunnels by 4 pedestals that screw into mounts. 3" X 3/4" shafts welded to the frame work slip into the upper portion of the pedestals.These have been drilled and a locking pin inserted. To revert the front to normal usage, pull the four locking pins, lift the deck off, and unscrew the pedestals from the flush mounts.
Lighting for night fishing is provided by four 500 watt halogen floods mounted beneath the shooting platform and powered by a Honda generator.
Two swivel seats are mounted on the platform for comfort during the slow streches.
Decking is treated 1/2" plywood covered with indoor/outdoor carpet.
|